PWM solar charge controller
NEEV · Solar charge controllers
PWM controllers for home-light and small street-light kits where cost leads the BOM, 5A to 30A.
Key features
- Loads up to 300 W, panels up to 300 W (12 V / 24 V)
- Three-stage, microcontroller-controlled charging
- Lead-acid, Li-ion or LiFePO4 battery
- USB mobile charging
Where it is used
Charging and load
| Charging | 3-stage PWM, above 95% efficient, temperature compensated |
|---|---|
| Idle current | Below 5 mA (below 1 mA version available) |
| Load efficiency | Above 95% |
| Indicators | Charging (green), low battery (red), battery level 25 / 50 / 75 / 100% |
| Ingress protection | IP21 |
| Protections | Reverse PV, battery overcharge, battery deep discharge, overload, reverse current; reverse battery auto-resettable; short circuit by electronics and fuse |
Ratings
| Rating | Panel | Load | Low battery cut-off | Reconnect |
|---|---|---|---|---|
| 12 V, 5 A | Up to 75 W | 40 W | 11.1 V | 12.5 V |
| 12 V, 10 A | Up to 120 W | 80 W | 11.1 V | 12.5 V |
| 12 V / 24 V, 30 A | Up to 300 W | 250 W | 11.1 V / 22.2 V | 12.5 V / 24.4 V |
From the Moxie solar products catalogue. Confirm the configuration with sales before ordering.
Catalogue codes
- MXLPWMCCU1XMAX5APWM charge controller, max. 5A
- MXLPWMCCU1XMAX10APWM charge controller, max. 10A
- MXLPWMCCU1XMAX15APWM charge controller, max. 15A
- MXLPWMCCU1XMAX30APWM charge controller, max. 30A
Catalogue items are quoted to order unless sales confirms dispatch stock. Send quantity, site and timeline for a quote.
